Sep 27, 2019, 9:39 AM

Hello @Petr-0

Yes, it is available on SAMSON 0.8.5.
Could you, please, check whether you have the State Updater Pack Element, it contains the Interactive modeling updater and other state updaters. Once you add it, you need to restart SAMSON such that SAMSON could download it and install it.

If you have it added and still do not see it in your SAMSON, could you, please, open the Log viewer in SAMSON (Interface menu > Log viewer) and type in the Filter 'State'. You should see 2 lines: one with an information on the Elements installation and another one with an information on whether it was loaded successfully or not. See the picture below.
0_1569577016088_LogViewer-StateUpdaterPack.png
If one of these lines is red, please, post here the description from the Log detail.